BIM²form Logo

Release Note Version 26.4.0

17. November 2026

BIM²form 26.4 is here!

We are ending the year with big news in our latest BIM²form version! Smart new features are live, crafted to give new possibilities to your productivity, and simplifying your day-to-day work. Let’s dive into what’s changed.

NEW: Redesigned Wall Settings

New Look & Options for BIM²form Wall Settings

The BIM²form Wall Settings have been completely redesigned to provide a clearer, more intuitive and consistent workflow across all manufacturers and wall formwork systems.

Settings are now organized into three clearly structured tabs:

  • Element Usage for element combinations, forming rules, compensations and corner solutions
  • Accessories for automatically placed accessories, operating components and stop ends
  • Settings for additional options such as linked models, system selection and large-size panels

The new structure ensures that comparable settings can always be found in the same place, regardless of the selected manufacturer or formwork system.

Measurement inputs now follow the Revit project units, including metric or imperial units and their respective display formats.

In addition, BIM²form now retains your system-specific settings across Revit sessions, so there is no need to configure them again after restarting Revit. Custom configurations can also be saved to and loaded from a file, making it easier to reuse different setups.

The result is a more consistent and user-friendly settings experience that simplifies configuration across different wall formwork systems.

NEW: Check Material Availability

PRO
Intelligent Material Check while Planning

With the new 'Check Material Availability' command, BIM²form helps you compare the components used in your current project with the material quantities actually available to you.

A dedicated, dockable panel directly in Revit provides an overview of the components used throughout the project, including manually placed items. Material demand can be compared with your available stock, making potential shortages visible while you are still planning.

For a more precise evaluation, individual cycles can be selected and combined to determine the material requirements for the relevant construction stages.

This makes it easier to identify potential bottlenecks early and verify that the required material is available before delivery.

'Check Material Availability' is available with a BIM²form Manufacturer PRO subscription for MEVA and currently evaluates MEVA components.

NEW: 2D to 3D

PRO | BETA

From 2D to 3D Layout

Many projects still start with 2D drawings, while formwork planning in BIM²form benefits from a 3D model. The new '2D to 3D' command helps bridge this gap by generating walls directly from an imported or linked DWG file in a Revit model.

Simply select the DWG, define the required wall height, and BIM²form automatically converts recognized wall geometry into a 3D model. This provides a faster starting point for 3D-based formwork planning without having to re-model the walls manually first.

2D to 3D is a BETA feature currently available with a BIM²form Manufacturer PRO subscription for MEVA.

FEATURE BOOSTS & IMPROVEMENTS

Revised Phase Assignment

Phase assignment has been improved for Single Placement of Elements and Accessories, and Column Formwork. Related elements are now assigned consistently to the same phase, while users are notified of conflicting phases and can select the appropriate phase when required. This improves reliability and reduces the need for manual corrections in formwork planning.

Additional Information for Formwork Jut-Out & Engagement Depth

Additional information for Formwork Jut-Out and Engagement Depth is now available directly in the settings, helping users better understand both parameters and their impact on formwork placement.

For further information, see our → tutorial.

Improved Handling of Cycle Connections

Cycle connections are now limited to the supported configurations Lengthwise, Crosswise, and Clamped. Unsupported geometries are excluded from processing to prevent errors or incorrect formwork results.

For further details on supported options, please refer to our → functional description or see the QuickIntro.

Progress Bar for Forming Commands

All forming commands now display a progress bar, providing clear feedback on the current processing status. Running commands can also be cancelled directly via the progress bar, giving users better visibility and control during formwork generation.

BUGFIXES

Improved Cancellation of All Intersections & Forming Across Cycles

Cancelling All Intersections or Forming Across Cycles now terminates the entire operation at once. Individual corner combinations no longer need to be cancelled separately, making the workflow faster and more convenient.

More updates under the manufacturer news tabs

Updates for MEVA

meva Logo

Enhanced Workflows for MEVA Wall Formwork

The MEVA wall formwork systems benefit from extended manual placement options, improved forming workflows and the latest technical specifications. The updates provide more flexibility for detailed planning while further improving existing automated workflows.

More Flexibility for Planning with MevaFlex

New options for MevaFlex make slab planning faster and more adaptable. Plan directly from 2D floor plans, create customized beam layouts with Fixed Width, colour-code H20 beams for clearer drawings, and adapt support placement to your project requirements.
Discover more below ↓

MEVA Wall Updates

Enhanced Manual Placement for MEVA

New Commands to Place Single Accessories have been added to further enhance efficient automated workflows with manual partial steps.

→ Timber Fillers can now be placed horizontally between lying elements, and the new
→ Foundation Tensioner command enables system-specific placement of foundation ties and clamps for horizontal foundation formwork.

SnapPoint-based placement further simplifies positioning, providing greater flexibility for non-standard situations that cannot be fully covered by automated forming.

Engineer working on a desk
Engineer working on a desk

Revised Functionality of Mammut XT

Mammut XT has been updated in accordance with the manufacturer´s latest technical specifications, extending and adapting the available families and placement logic.

The update includes:

  • New Element Widths: New 45 cm and 55 cm element widths across all existing heights
  • Improved Placement: Enhancements to element placement and Storage Manager
  • Revised Attachment Points: updated attachment points, including multifunction struts and new tie locations
  • New Corner Options: Revised corner configurations, including the new fixed solution with 35 cm IC and 10 cm OC, while the previous variable corner solution remains available.

These updates ensure that the revised Mammut XT components and configurations are consistently supported throughout your planning workflow.

BUG FIXES

Improved Bolting on Articulated Corners
Bolting for articulated corners has been improved for large-size panels, extended wall thicknesses, and other special configurations, ensuring more reliable placement across non-standard planning situations.

CONTENT

New Families for Taper Tie and Anchoring Foundation available.

MEVA Slab Updates

NEW: Plan Flex Slabs Directly in 2D

Planning with MevaFlex is now even more flexible: With the new 'Height Definition by Input' option, Flex slab formwork can be planned directly from a 2D floor plan without requiring a complete 3D model.

Instead of defining the height by selecting reference planes in a side view, simply enter the required height manually. The area to be occupied can then be defined directly in the floor plan using pre-defined rooms or by edge selection.

This maintains the existing functionality while simplifying the workflow, and is especially useful for early planning stages, existing buildings, or projects where no complete 3D model is available, as it provides a faster and more flexible way to start planning directly from the available 2D geometry.

Engineer working on a desk
Engineer working on a desk

NEW: Colour H20 Beams

By popular request, the new Colour H20 Beams command allows H20 beams to be displayed in different colours based on their length and family type.

Similar to Colour Phases, the command creates a copy of the current view and applies the colour coding specifically to this view. This provides clearer floor plans, makes different beam configurations easier to identify, and helps reveal potential for optimization at a glance.

NEW: Fixed Width for MevaFlex

The new Fixed Width command provides greater flexibility when planning with MevaFlex. It enables double beam rows to be placed based on a defined secondary beam length, allowing beam areas and joists to be planned quickly and consistently.

Choose from predefined secondary beam lengths or enter a custom value to adapt the layout to your project requirements. Additional settings allow side guards and formwork facing to be included and their offsets to be adjusted together with the primary beams.

This provides a flexible and straightforward workflow for creating customized Flex slab layouts directly in BIM²form.

Optional Prop Placement for MevaFlex

OPEN INNOVATION Prop placement can now be deactivated when planning with MevaFlex, providing greater flexibility for slab formwork layouts where alternative support solutions, such as shoring systems, are used.

Engineer working on a desk

Updates for PERI

PERI Logo

No manufacturer-specific updates for PERI are included in this release.

Updates for Uni-span

unispan Logo

BUGFIXES

Correct Stop End Placement for E/F Panel
All available stop end variants for Uni-span E/F Panel are now placed correctly, including solutions generated through Forming and P-Shape for pillar templates.

Updates for Steel-Ply

STEEL-PLY

ENHANCEMENTS

New Compensation Option for Steel-Ply
The 'Middle of Wall' compensation position is now also available for Steel-Ply, providing greater flexibility when optimizing element combinations and filler placement.
Extended Automation Levels: Manual Component Placement
The range of automization levels has been enhanced to include manual placement of Panels, Tie Rods and Assembly Locks. It provides you with greater flexibility and control when creating detailed formwork layouts with Steel-Ply.
Engineer working on a desk

IMPROVEMENTS

Improved Automatic Forming for Steel-Ply
Automatic forming for Steel-Ply has been further improved, including better performance, optimized combination placement for element and fillers, and improved stop end solutions on pillar templates.

BUGFIXES

Fixed Steel-Ply Export Functions
All export functions now correctly include Steel-Ply components, including Total Quantity, Export Selection, and Custom Export.

Updates for Ringer

Ringer Logo

No manufacturer-specific updates for Ringer are included in this release.

Thank you to our community for your continued input—your feedback drives our innovation! Let us know how BIM²form 26.2 helps optimize your workflows.

Ready for the next step?

WordPress Cookie Plugin by Real Cookie Banner